101392 Isolator Ex9I40 3P 40A

EAN: 8592765013934

Isolators Ex9I40 can be used as a main switch in wide variety of applications. These switches are tested according to IEC / EN 60947-3 standards and also fulfill the requirements for the isolation functionality. Utilization category AC-22A ensures possibility of switching mixed resistive and inductive loads with low overloads with cos ϕ = 0.65. Subcategory A allows frequent operation. Isolators of line Ex9I40 are produced in modular design with width one module unit for all versions up to 4-pole. It brings very low consumption of space in an installation.

Characteristics

Paremeter Value
Number of change-over contacts 0
Number of poles 3
Short-circuit breaking capacity (Icw) 0.48
Forced segregation (according to DIN VDE 0113) YES
With signal lamp NO
Built-in depth 80
Nominal rated current 40
Nominal rated voltage 400
Rated switching capacity 0.8
Width in number of modular spacings 1
Number of normally open contacts 3
Voltage type AC
Degree of protection (IP) IP20
Switching function Off switch
Number of normally closed contacts 0
Colour calotte Grey

Documents

Document Type Document Name Size Format
Manual Mounting instruction Ex9I40 1.2mb PDF
Declaration of Conformity Declarations of Conformity Ex9I40 0.5mb PDF
Datasheet Datasheet Ex9I40 0.5mb PDF
Catalogue Catalogue Installation Devices 0.0gb PDF WEB